Home › Slab leak repair cost

Price guide · Pomona, CA

Slab Leak Repair Cost in Pomona, CA: What You Will Pay

What detection and repair usually cost, what pushes the price up, and what a written estimate should show before anyone cuts your floor.

Call (909) 415-2610

Short answer: National contractor-cost data puts slab leak detection at $150 to $600, spot repair under the slab at $200 to $2,000 and rerouting lines at $1,500 to $15,000. Typical overall cost is around $2,300, with repairs ranging from $630 to over $4,400. Floor type, access, the number of leaks and wall repairs after a reroute decide where your job lands. Southern California labor and flooring costs can push it higher.

Written by the Pomona Slab Leak Pros team. Last reviewed November 6, 2026.

Slab leak repair cost depends on the job: collage of a residential slab leak repair — Floor type, access and repair method all change the slab leak repair cost.

Further reading: California Contractors State License Board: check a plumber’s license.

Slab leak repair cost ranges at a glance

Service	National reference range
Leak detection	$150 to $600
Spot repair under the slab	$200 to $2,000
Rerouting lines	$1,500 to $15,000
Typical overall cost	About $2,300 (repairs from $630 to over $4,400)
Typical repair time	Hours to 3 days

Figures are national reference data from HomeAdvisor via Angi, April 2024. Southern California labor and flooring costs can push a job higher. This is not a quote.

Slab leak repair cost depends mostly on where the pipe is and what covers it. Ask every plumber to break the slab leak repair cost into detection, repair and finish work so you can compare quotes fairly.

What raises the price

Floor finish. Tile or stone that must be matched, or finished flooring over the leak, costs more to open and restore than bare concrete.
Access. A leak under a kitchen island, a bathroom or a built-in is harder to reach.
Number of leaks. A second leak adds locating and repair time, and it is a sign the pipe may be near the end of its life.
Method. Spot repair is the lowest cost when there is one leak. Rerouting costs more but avoids opening the slab. Epoxy lining and repiping have their own price ranges, which depend on the pipe and the size of the home.
Finish work. Drywall and paint patches after a reroute, and concrete patching after a spot repair, are part of the total.
Permits and inspection. Some repairs need a permit. Ask whether it is included in the price.

Cheaper is not always better

Spot repair is the lowest-cost fix when one leak is the whole problem. In older copper, another pinhole can appear later, and a second opening of the floor costs more than the first. A reroute or a repipe costs more up front but replaces the failing run. A good plumber tells you which option they would choose for your house and why, including when the cheaper choice is likely to be good enough. Our repair options for Pomona homes explain when each one fits.

What a written estimate should show

The leak location and the readings that confirmed it. See how slab leak detection works.
The repair method and what is included: concrete, flooring, drywall, paint, permit and inspection.
What is not included, such as matching tile that is no longer made.
How the price changes if the scope changes once the pipe is exposed.
The timeline and whether the water is off during work.

If two quotes differ widely, compare these lines first. The gap is usually in what is left out.

Costs that are easy to miss

Water damage to floors, walls or belongings, which may be separate from the pipe repair. See what insurance may cover.
Your water bill while the leak ran. Some utilities have a leak adjustment process, so ask your water provider.
Moving furniture and temporary housing if floors must be opened in several rooms.

Is the repair your cost?

Not always. In a rental or an HOA community, the owner of the pipe is usually responsible. Read who pays for a slab leak before you pay a bill that may not be yours.

Slab leak cost questions

How much does slab leak repair cost on average?

National data shows a typical overall cost of about $2,300, with repairs ranging from $630 to over $4,400. Your price depends on the floor, access, number of leaks and the method used.

Why are slab leak quotes so different?

Quotes differ in method (spot repair, reroute, lining or repipe), in what finish work is included, and in how well the leak was located first. Compare the written scope, not only the total.

Is rerouting cheaper than breaking the slab?

Not always. Rerouting often costs more than a single spot repair, but it avoids cutting the floor and can be the better value when the line is failing or the floor is hard to open.

Does leak detection cost extra?

Detection is its own step, with a national range of $150 to $600. Ask whether the fee is applied toward the repair if you go ahead.

Will I get the price before work starts?

You should. We give the scope and price in writing before anything is cut, and we tell you if the scope changes once we are in the wall.

Get the scope and price in writing first.

Call and a Pomona plumber will locate the leak, show you the options and give you the price before anything is cut.